With letterheads using low temperature dyes or thermography That exceeds the recommended weight specification in this guide Some types of paper may not perform well or may cause damage to your machine.ġ A curl of 2 mm (0.08in.) or greater may cause jams occur. If you use bond paper, paper having a rough surface or paper that is wrinkled or creased, the paper may Preprinted paper must use ink that can withstand the temperature of the machine's fusing process 200 degrees centigrade (392 degrees Fahrenheit). Keep the paper flat and away from moisture, direct sunlight and heat.ĭO NOT use inkjet paper because it may cause a paper jam or damage your machine. Store paper in its original packaging and keep it sealed. Always test samples of paper before purchasing to ensure desirable performance. However, some paper variables may have an effect on print quality or handling reliability. The machine is designed to work well with most types of xerographic and bond paper. This machine can use recycled paper that meets DIN 19309 specifications. Use long grain paper with a neutral Ph value, and a moisture content of approx.
Use paper that is 75 to 90 g/m 2 (20 to 24 lb) Use plain paper that is appropriate for laser machines to make copies. The following paper specifications are appropriate for this machine: *3: Load only one sheet of Glossy in the MP tray. *1: Legal or Folio size paper are not available in some countries. Paper capacity of the paper trays and Media type Use labels that are designed for use in laser machines. For best results, follow the instructions below:ĭO NOT load different types of paper in the paper tray at the same time because it may cause paper jams or misfeeds.įor correct printing, you must choose the same paper size in your software application as the paper in the tray.Īvoid touching the printed surface of the paper immediately after printing.īefore you buy a lot of paper, test a small quantity to make sure that the paper is appropriate for the machine.
0 kommentar(er)
